Get Your Earbuds Not Charging? Here Are 3 Simple Steps To Fix Them

 Learn How To Fix Your Earbuds Not Charging. You Will Be Glad You Did!

I’ve had this problem happen to me several times now. It’s happened to me when I was charging my phone, charging my laptop, or charging my other earbuds. I’m sure you’ve been there too. You plug in one of these things and it doesn’t charge. If you’re anything like me, you’ll probably just leave it plugged in and try to forget about it. But if you’re like me, you’ll eventually just have to give up on the idea of charging it. That’s a big waste of time. Let’s talk about some of the most common problems that could be causing your earbuds not to charge.

 I am going to discuss about Tozo Earbuds Not Charging – Effective Troubleshooting Tricks 

1. Give Enough Charging Time
2. Ensure Adequate Power Supply
3. Use Compatible Charging Tools
4. Clean the Charging Ports
5. Repair the Broken Ports
6. Maintain the Temperature
7. Liquid Damage
8. Exit the Programming Mode
9. Update the Firmware
10. Reset Your Tozo Earbuds
11. Damaged Hardware

1. Give Enough Charging Time

Most earbuds, if not all of them, don’t always start working right away.

Your earbuds are about to be drained out because they’re totally dead.

It’s important to make sure that your headphones connect properly to the device and that the battery is fully charged before

After doing that, check the charging status again.

2. Ensure Adequate Power Supply

It’s likely that the reason your Tozo earbuds aren’t charging is that you haven’t been

If the power supply is faulty or it’s delivering low voltage, then you may need to replace it.

Plug your Tozo into another power outlet. Make sure the connections are all securely in place.

If you’re charging through your laptop, make sure it is powered on.

The computer should be active, and it should not be in hibernation mode.

Instead of connecting to a USB hub, you can also plug your headphones into the wall power outlet.

Finally, don’t charge your Tozo earbuds through a high-voltage power supply.

Use the recommendations in the user manual.

3. Use Compatible Charging Tools

A problem with the charging tools could be the cause of the problem.

Most often, this is why you charge your earbuds. They are generally placed into their charging case which is then connected to a power source.

It comes with a USB cable and an AC adapter to provide the power.

Check the cable and adapter carefully to make sure they aren’t damaged or loose, and that they fit securely into the charging case.

The replacement should come with an instruction manual and it’s always best to remove the old one first.A different adapter is also important if you want to charge your devices.

According to the repair guide, the most common issues that arise when using your charging tools are damage to the internal parts, such as a bad connection between your cable and charging head.

When the batteries get low, the LED turns red. Replace the battery and try charging it again.Third-party tools can result in compatibility issues that might lead to charging issues.

4. Clean the Charging Ports

Cleaning the charging ports may fix the issue. If you’ve got the right accessories, you can charge your device even without connecting it to a power outlet.

You need to clean the charging ports on the Tozo charging case and the AC adapter.

Use a new toothbrush, cotton swab, or a toothpick to clean the contact points inside the case.

Remove all the dust gently, avoid using any sharp tools and you should be able to get back up and running in no time.

5. Repair the Broken Ports

Make sure that all the charging cables are securely plugged into the wall.

The connectors inside the port are broken.

I know that it seems weird but that’s exactly what happens when you connect a phone charger to a phone when it’s not working.

It’s important to check the charge contact points in the charging case, just like the battery.

Put the Tozo case on the right side of your head.

Make sure that all of the ports are working. Repair them if necessary.

6. Maintain the Temperature

If you’re wearing your earbuds for several hours without recharging them, it might be overheating that stops them from charging.

Because they get heated up and don’t respond. It has a built-in protective mechanism to avoid overheating.

In this case, you should leave the earbuds for a couple of hours.

In any case, be sure to always keep your phone charged at all times so that you can stay connected to family, friends and business contacts.

You shouldn’t put your headphones in the sun. And don’t put them near a heater.

7. Liquid Damage

Water damage is another reason for not charging your Tozo earbuds.

The earbuds aren’t working when there’s liquid in them. Make sure that they don’t get wet, and if possible, try to keep them dry.

Your mobile phone charger may have been exposed to water, or it could be damaged.

To be certain you’re not dealing with a damaged product, check both the earbuds and case for any signs of damage.

8. Exit the Programming Mode

These Tozo earbuds should not be operating in the programming mode.

The user can enter the programming mode accidentally.

If your earbuds are already connected to your device, removing them from pairing mode will make it much easier to switch back

Turn OFF the pairing mode and then check the charging status again.

9. Update the Firmware

Firmware updates are essential to keep your device working.

Unfortunately, Tozo does not support a mobile app.So, you can update them from the Tozo app. You can access the store in the app,Follow the steps below to update your earbuds. 1. Power off the device, then

Check the battery charging next time the update is done.

10. Reset Your Tozo Earbuds

Resets often solve many issues. A simple power-on, however, usually won’t work.

You can reset your Tozo earbuds by the following steps; Go to the Bluetooth menu on your mobile device and click your Tozo earbuds appearing in the list.

Turn off the Bluetooth on your smartphone or other device. It’s easy to do. Simply turn off the Bluetooth option.Q:

Put the charging case away while still touching and holding the touch panel of the earbuds together.

Hold it for 10 seconds or until the LED lights on both earbuds flash purple and they make a beep sound three times.

It’s safe to say that the reset process was successful. If you don’t see this confirmation sign, repeat the process again.

11. Damaged Hardware

By following the instructions below, you’ll be able to charge your Kindle without problems.

If you cannot get any sound out of them, you need to see an audiologist or ENT specialist to fix your earbuds.

If the hardware defects can be built-in. Consult tozo and ask for a replacement. A:

You can get professional help for any earbud repair but if your earbuds are old or suffered hardware damage then you should try to consult a

If you’re having trouble hearing anything, check that your battery isn’t dead.

If the present pair of Tozo earbuds is broken completely, then you may want to buy new ones.

Conclusion

Tozo Earbuds Not Charging – Effective Troubleshooting Tricks

In conclusion, the best way to troubleshoot is to start by looking at the device itself. If it’s plugged in, check that the cable is securely connected to the device and the battery is fully charged. If the battery is low, make sure that the device is not charging. If the device is charging, check that the wall socket is not damaged. If you are using a USB charger, make sure that the USB port is working properly. If you are using a car charger, make sure that the car’s battery is not dead.

 FAQs

1. What should I do if my earbuds are not charging?

First, make sure your battery is charged. Then, turn your device off and unplug it from the charger. Plug the charger back into the wall and wait for the battery to charge again.

2. How do I fix my earbuds?

You can fix your earbuds by removing the battery cover and putting the batteries back in.

3. What should I do if my earbuds don’t work?

If your earbuds don’t work, check to see if the batteries are dead. If they are, you can replace them with new ones.

4. How do I get rid of earbuds stuck in my ears?

If you’re having trouble getting your earbuds out, try using a cotton swab.

5. How can I make sure my earbuds are working?

You can make sure that your earbuds are working by turning on your device and listening to music or making a phone call.

6. What should I do if my earbuds stop working?

If your earbuds stop working, make sure that the batteries are still charged.