How to Replace JBL Flip 5 Battery?
JBL Flip 5 Battery Replacement Instructions
The JBL Flip 5 is a Bluetooth speaker with a built-in rechargeable battery. It has an amazing feature that allows you to listen to music and watch videos on your smartphone while it’s charging. But, as we all know, batteries eventually run out. When they do, the speaker stops working, and you have to replace the battery.Are you looking for a replacement for JBL Flip 5 battery? Then, you have landed at the right place. In this article, I will discuss about how to replace JBL Flip 5 battery.
Let’s see How to Replace JBL Flip 5 Battery?
1. How to Replace JBL Flip 5 Battery?
2. Remove the Outer Cover of JBL Flip 5
3. Remove The Rubber Spine of JBL Flip 5
4. Remove the Passive Radiators of JBL Flip 5
5. Open the Speaker of JBL Flip 5
6. Take the Battery out of JBL Flip 5
7. Insert the New Battery of JBL Flip 5
How to Replace JBL Flip 5 Battery?
If you want to buy a new JBL Flip 5 speaker, you can easily replace the JBL Flip 5 battery yourself. You can also do this if your speaker has developed a problem with the battery. All you need to do is follow the step-by-step instructions below.
The lithium ion Polymer 4800mAh battery plays almost for 12 hours. The charging time is only 2. 5 hours. Additionally, the battery of this speaker is reliable. But, it may damage due to overheating and overcharging. If water enters the battery, it stops working. In this article, we will guide you that how can you replace the battery of your JBL Flip 5 at home.
Before going to replace the battery, confirm, by all means, that battery has been damaged or not. Maybe there is some other issue with your speaker. So, you must consider all the facts. Let us start the process.
Remove the Outer Cover
Take the first step towards improving your music listening experience by removing the outer cover from your JBL Flip 5.
The cover is attached by clips and there are no screws.
Take a pocket knife or an opening tool and gently pry the book open.
Now, put some pressure on the cover, and push it up. [Influenza vaccines in pregnancy].
This is a simple little tool, that will work just fine.
Repeat the process on the other side until the cover is completely removed.
Remove The Rubber Spine
Once you remove the outer case of your JBL Flip 5, it’s internal hardware setup is visible.
Now, remove the rubber back panel of the speaker. It’s fixed by 4 screws.
If you have a Philips screwdriver, you’ll be able to open the screws on both sides of the rubber spine.
The rubber spine is connected to the center part of the base by six rubber straps, which help keep the spine stable.
Once you have done this, use the plastic opening tool to open the clips.
Put in the new screws under the existing ones, then push the new screw up.
This will separate the colored rubber spine from the speaker.
Remove the Passive Radiators
They are positioned in the JBL Flip 5, so that they work as well as possible whether they
Open the Speaker
You’ll now need to remove the speaker from the base and lift out the four screws.
Open the screws to expose the underlynng part. The speaker is connected to the PCB by some wires.
Gently pull the wire connector, and remove the speaker.
Pull the white cable connecting the camera’s USB cable and charging port.
Take the Battery out
In the center of your Kindle device, under the speaker and next to the power button, you’ll find a white ribbon cable.
The ribbon cable is mounted on a tiny grey lever. To get it off, pull the lever, then carefully press the ribbon cable
A big, white plug connects the battery to the PCB.
It will look pretty obvious. Take this plug out and remove the battery.
Insert the New Battery
- You can now put the new battery in your JBL Flip 5.
- Repeat all the steps, but use the correct order
In conclusion, I will share the steps to replace a JBL Flip 5 battery. You will learn how to replace the battery in your JBL Flip 5 headphones, and you will also learn how to fix the problem if you are having trouble with your JBL Flip 5 battery
Does JBL Flip 5 play while charging?
Yes, the JBL Flip 5 plays music while charging. With this speaker you can use this charger. However, it will extend the battery life.
How can I know the battery status of my JBL Flip 5?
The JBL Flip 5 speaker has LED battery indicators. When the battery charge fully, all the LED indicators glow green. The indicators are turning off one by one as the battery is going down. If the battery indicator is glowing red, your battery is critically low.
What is the battery timing of the JBL Flip 5?
The JBL Flip 5 battery can last up to 12 hours. Depending on volume and source, the time may decrease.
How long does it take to replace the battery?
It takes approximately 5 minutes to replace the battery.
Is there any way to save money on replacing the battery?
Yes, there is a way to save money. When you buy a new battery, you have to pay for shipping. You can buy a used battery online and have it shipped to your address.
Does it matter which brand of batteries I use?
No, it doesn’t matter which brand of batteries you use.
How do I know which batteries are compatible with my device?
The best way to find out which batteries are compatible with your device is to check the manual that came with your device.